NewOctober 2026 release: John Deere sync redesign, rate min and max limits, yield report zones

Variable Rate Crop Protection

Variable-rate crop protection

Variable rate herbicide application: spray the weed patches, not the whole field

Map weed patches and thin canopy from satellite imagery, turn them into an on/off prescription map or one with two application rates, and load it on your sprayer’s terminal. Section control switches the boom; you pay for the product the patches need.

✓Weed patches mapped from imagery

✓Prescription maps: spray or skip, or two doses

✓Ready for ISOBUS and John Deere terminals

Independent of input sellers, and your farm data stays yours

30-day trial on up to 250 acres (101 ha), no card required

Herbicide prescription in GeoPard: the weedy zone marked for spraying and the clean zone switched off

45.9 %of a 311-acre field left unsprayed in one herbicide pass, 185.6 L of product saved

Patch spraying planner

How much of a field your sprayer can leave dry

A 21.6-hectare sample field with weed patches and a weedy headland, at your field size, product rate, price and boom.

Patches and boom

Section width

L/ha
ha
€ per litre

Boom 36 m, switching every 3 m of travel

Bare soil and cropWeed coverSprayed

28 %of the field sprayed

91.0 Lproduct on your field

229 Lproduct saved against a flat pass

€2,519saved on this pass

Where the sprayed area comes from

PatchesBufferSection widthLeft unsprayed

Share of the field sprayed, by section width

27 %
28 %
31 %
35 %
53 %
1 m3 m6 m12 m36 m

Product on the field = label rate × sprayed area; a flat pass = label rate × the whole field. Patches keep the full label rate. Weeds grow in patches rather than evenly (Cardina, Johnson and Sparrow, Weed Science, 1997), which is what patch spraying from maps relies on (Gerhards and Oebel, Weed Research, 2006).

A real prescription

311 acres, one herbicide pass, 46 % of the field left dry

A post-emergence pass planned in GeoPard from a single vegetation index image. The patches got the full 1.3 L per acre; the clean ground got nothing.

Vegetation index map of a field before a post-emergence herbicide pass, with weed patches showing against the crop
The vegetation index image the prescription came from
Field311.3 ac
Unsprayed zone142.8 ac45.9 % of the field
Sprayed zone168.5 acat 1.3 L/ac
Flat pass404.7 L311.3 ac × 1.3 L/ac
Prescription219.1 L168.5 ac × 1.3 L/ac
Product saved185.6 L404.7 L − 219.1 L
Saved at $12.00/L$2,228185.6 L × $12.00

In GeoPard

From satellite image to the sprayer’s terminal

  1. Pick the image

    Sentinel-2 every few days, or Planet at 3 m every day for small patches. Soil-adjusted indices such as OSAVI separate green weeds from bare soil before the crop closes; red-edge indices work later in the season.

    ›Tutorial: indices for crops and soils
  2. Map the patches

    Split the image into a sprayed and an unsprayed zone, then merge, split or redraw any patch you know better from the field.

    ›Tutorial: weed patches and herbicide prescription
  3. Write your own rule

    For a rule of your own, such as spraying only where the index rose since last week’s image, write it as a formula and the map comes back from it.

    ›Tutorial: equation-based maps
  4. Set the application rates

    Zero on the clean ground and the label rate in the patches, or two application rates by canopy for fungicide and desiccant. The table totals the product to load for the field.

    ›Tutorial: application rates by zone
  5. Load it on the terminal

    Download ISOXML for an ISOBUS terminal or a shapefile with a numeric application rate, or send the prescription to John Deere Operations Center as a work plan.

    ›Tutorial: ISOXML export›Tutorial: John Deere work plans
  6. Check what went on

    Bring the as-applied or See & Spray data back from Operations Center and set it against the map, with the same formulas, to find the patches that return next season.

    ›Tutorial: See & Spray data
Exporting a herbicide prescription from GeoPard to John Deere Operations Center, as a shapefile or as ISOXML
One prescription, four ways to the cab

Who does what

✓GeoPard maps the patches, builds the prescription and writes the file.

✓Your terminal and its section control switch the boom in the field.

✓After the pass, GeoPard reads the as-applied data back for the next decision.

Field-tested settings

Settings that hold up in the field

Index

OSAVI until the canopy closes, then a red-edge index from the 6 to 9 leaf stage.

Smallest patch

Skip patches smaller than about twice a section’s footprint: around 72 m² for 3 m sections on a 12 m boom.

Edges and buffers

Pull the map 3 to 6 m in from the field edge, and add the no-spray zones the label and local rules require.

Timing

Run the map again 7 to 14 days after emergence to catch escapes in a second pass.

Ground check

Walk three to five of the largest patches before the pass, and keep before and after photos to tune the threshold next time.

Cloud and noise

Pick another date when cloud or shadow crosses the field; for patchy, noisy maps raise the minimum patch size or switch to Planet 3 m imagery.

Agronomists on GeoPard

From people who write prescriptions with it

“Data visualization leads to the creation of ideas and analytics helps us to solve problems. GeoPard’s platform not only helps us visualize data but also gives us the tools to analyze data so we can create solutions and write prescriptions.”

Steve LarocqueSteve LarocqueOwner of Beyond AgronomyAlberta, Canada

“Using Geopard has streamlined key parts of our workflow. In seasons where time is money, we can rely on the team at Geopard to get it done.”

Brendon FriesenBrendon FriesenOperation and Technology ManagerPointForward, Canada

Pricing

What a crop protection prescription costs

Annual covers every field and every prescription. Pay-As-You-Go charges each map once, so a single patch pass costs cents per acre.

Annual

Every field on the farm, all season.

$0.59 per acreper year on the first band (€1.35 per hectare), down to $0.45 (€1.03) as the farm grows

  • ✓Unlimited weed maps, prescriptions and formula maps
  • ✓Minimum $200 a year (€185)
  • ✓One user seat included, extra seats $60 a year

Pay-As-You-Go

A few fields, or the first season of patch spraying.

$20 a month(€19) plus each map you build

  • ✓Zones or prescription map: $0.072 per acre (€0.165 per hectare)
  • ✓Formula map: $0.10 per acre (€0.229 per hectare)
  • ✓Planet 3 m image: $0.08 per acre (€0.183 per hectare)
  • ✓Month to month, with no annual commitment

30-day trial

Your own fields, before you pick a plan.

250 acres (101 ha)for 30 days, no card required

  • ✓Every analysis feature, including prescriptions and export
  • ✓John Deere Operations Center connection
  • ✓Nothing is charged when it ends

Start free

Billed in USD in acre regions such as the US and Canada, and in EUR everywhere else.

Full price list and payback estimator

Variable rate herbicide application from weed maps

Weeds rarely cover a field evenly. They come back in the same low spots, along the headland, on compacted bands and where last season's control failed. A blanket pass sprays every acre for the patches on some of them. Variable rate herbicide application, often called patch spraying or spot spraying, treats the patches at the full label rate and leaves the clean ground untreated.

How the weed map is made

Early in the season, green weeds stand out against bare soil and a small crop on satellite imagery. A soil-adjusted vegetation index such as OSAVI shows them best until the canopy closes; a red-edge index works later. GeoPard reads Sentinel-2 imagery every few days and Planet imagery at 3 m every day, splits the image into a sprayed and an unsprayed zone, and lets you merge, split or redraw any patch you know better from the field.

From map to sprayer

Set zero on the clean ground and the label rate in the patches, and the application rate table totals the product for the tank. The prescription downloads as ISOXML for ISOBUS terminals or as a shapefile, or goes to John Deere Operations Center as a work plan. The terminal's section control then switches the boom: narrow sections and nozzle control follow the patch edges closely, while a boom with wide sections saves only where whole strips are clean.

Fungicide and desiccant at two application rates

For fungicide and harvest desiccant passes, the same imagery splits the field into dense and thinner canopy. Dense canopy carries more leaf area and gets the full application rate; thinner canopy gets a reduced application rate within the label range, so the product follows the crop instead of the field average.

Checking the pass

After spraying, bring the as-applied data back, including See & Spray data from Operations Center, and set it against the map. The patches that return year after year become the target for the next residual or pre-emergence decision, and every prescription stays with the field record.

The management zones and variable-rate prescription maps page covers the same workflow for seed and fertilizer, and the crop monitoring page covers the imagery behind it.

Frequently asked questions

Which sprayers and terminals can use the prescription?

Any sprayer whose terminal reads a prescription map and switches sections. Download ISOXML for an ISOBUS terminal, or a shapefile with a numeric application rate for other displays. On a John Deere farm, send the prescription to Operations Center as a file or a work plan.

The narrower the sections, the closer the boom follows the patch edges and the more ground stays dry. Individual nozzle control gets the most out of a patch map; a boom with a few wide sections still saves wherever whole strips are clean.

I already run a camera sprayer. What does GeoPard add?

A camera sprayer decides nozzle by nozzle as it drives. GeoPard works across the season and across years: bring the See and Spray data in from Operations Center, map where the sprayer fired, and find the patches that come back.

From there, a formula targets the next input only where it is needed, for example a residual herbicide on the ground that carried weeds last year.

How small a weed patch shows up on the map?

Sentinel-2 imagery has 10 m pixels and Planet imagery 3 m pixels, refreshed daily. A patch shows reliably once it covers two or three pixels, so Planet is the choice for small patches and for a second pass to catch escapes.

The map can be resampled to 1 m, which smooths the edges your terminal follows but adds no detail beyond the image.

Does the prescription stay within the product label?

Yes. An on/off map sprays the patches at the full label rate and leaves the clean ground untreated; it never cuts the dose where weeds are.

For a fungicide or desiccant map with two application rates, set both application rates inside the label range. Buffer zones, wind and drift rules apply exactly as they do to a flat pass.

Does it work for fungicide and desiccant passes?

Yes. A vegetation index splits the field into dense and thinner canopy, and each zone gets its own application rate: the full application rate where the canopy is dense and a reduced application rate where it is thin. The application rate changes along the pass for the whole boom.

The application rate table totals the product for the field, so the tank mix matches the map before the sprayer leaves the yard.

What does a herbicide prescription cost in GeoPard?

On Annual, every weed map, prescription and formula map is included, from $0.59 per acre a year on the first band (€1.35 per hectare), with a $200 minimum.

On Pay-As-You-Go, a zones or prescription map costs $0.072 per acre (€0.165 per hectare) once, a formula map $0.10 per acre, and a Planet 3 m image $0.08 per acre, on top of $20 a month.

Have the next spray pass mapped before the weeds are up

Connect your fields and build a patch map from this week's imagery, or book a call to set up your terminal, John Deere and a price for your acres.

wpChatIcon
wpChatIcon

    Request Free GeoPard Demo / Consultation








    By clicking the button you agree our Privacy Policy. We need it to reply to your request.

      Subscribe


      By clicking the button you agree our Privacy Policy

        Send us information


        By clicking the button you agree our Privacy Policy