NewOctober 2026 release: John Deere sync redesign, rate min and max limits, yield report zones

On-Farm Trials

On-farm trials

On-farm trials that give a straight answer at harvest

Lay strips or plots on your own field at implement width, send them to the planter or spreader with the prescription, and compare the treatments on cleaned yield and the rate that actually went on.

✓Strips and plots at your machine width

✓Trial and zones in one file for the display

✓Each treatment compared on the same ground

Independent of input sellers, and your trial data stays yours

30-day trial on up to 250 acres (101 ha), no card required

On-farm strip trial in GeoPard: three seeding rates in four replicated blocks, laid across management zones at implement width
Three seeding rates in four blocks, laid across the management zones

Trial designer

How many strips does a real answer take?

On uneven ground, one pair of strips measures the soil under them more than the rate. Replicated strips side by side cancel the ground out, and the margin around the result shrinks with every block you add.

Crop

Treatment

Rates in the trial

Between neighbouring rates

Field

Strip width (implement)

Units

The trial on the field

6 strips · 10.9 ac (10 % of the field)

30,000 seeds/ac

Your rate, 34,000 seeds/ac

38,000 seeds/ac

Background: the field’s productivity zones

The answer

Each rate against your rate, block by block

38,000 seeds/ac against your rate

+5.1 bu/ac give or take 4.0

The difference is real

30,000 seeds/ac against your rate

−5.3 bu/ac give or take 4.1

The difference is real

Same trial, the next season’s weather and soil noise

Every strip at harvest

bu/ac

Out of 100 seasons like this one

By number of blocks, 300 simulated harvests each

With 2 blocks, the trial finds the real difference in 10 of 100 seasons and points the wrong way in 4. From 8 blocks it finds it in 80 or more.

Strips in each block sit side by side in a random order, so the ground under them is shared and the rate is what differs. The margin is the 95 % range of the block-by-block difference. Strip-to-strip noise left after blocking: 2 % of yield on even ground, 3 % on typical ground, 5 % on patchy ground.

From a winter wheat trial

The higher rate won by 1.5 t/ha, until the trial was read on the same ground

A field at 150 kg of nitrogen per hectare, with two trial areas at 120 and 180. The raw averages pointed one way; the same harvest read on the same ground pointed another.

120 kg N/ha1.86 ha

6.39

150 kg N/ha45.8 ha

4.99

180 kg N/ha1.76 ha

6.50

Yield, t/ha

Both trial areas out-yield the field by 1.4 to 1.5 t/ha, the low rate as much as the high one. The rate is not what differs here.

On that zone, 60 kg/ha of nitrogen between the lowest and highest rate bought no measurable yield.

›The full analysis, step by step

Trial layouts

Five layouts, one for each kind of question

Width follows the implement, the angle follows the AB line, and a buffer keeps neighbouring treatments from mixing. Shuffling puts each treatment in a random place inside every block.

Field strip

Full passes across the whole field, crossing every zone.

Best for seeding or nitrogen rates with farm machinery, 4 to 6 replications.

Zone strip

Strips clipped to each management zone, so every zone gets its own comparison.

Best for asking whether the rate should differ by zone.

Plot grid

Blocks of short plots, each block holding every treatment once in a random order.

Best for hybrids, varieties or products on fairly even ground, 3 to 6 blocks.

Split-plot

Rates as the main plots, a second factor such as the hybrid repeated inside each one.

Best for the same rates across two or more hybrids.

Checkerboard

Treatments alternating across a grid, spread over the whole trial area.

Best for a first look at a field with strong variability.

Split-plot trial setup in GeoPard: two hybrids and four seeding rates, with strip width, buffer and treatment difference settings
A split-plot: four seeding rates across two hybrids, set at 18 m wide with a 2 m buffer
A trial layout, start to finish · 1 min

In GeoPard

From the zones map to the verdict, on one field record

Before the pass

  1. Start from the zones map

    Trials are drawn on the zones map you already use for the prescription, so the trial and the field rate live in one layer.

    ›Tutorial: zones maps
  2. Lay out the trial

    Pick the layout, set width to the implement and the angle to the AB line, add a buffer, and set the rates around your own with one slider. Shuffle, check the fit on the map, save.

    ›Tutorial: trial design

In the season

  1. Send it to the cab

    The trial exports merged with the zones as one prescription: ISO-XML for an ISOBUS terminal, or a John Deere work plan straight to Operations Center.

    ›Tutorial: John Deere work plans
  2. Check what went on

    The as-applied map against the target rate shows which strips got their rate and which did not, before anyone reads a yield.

    ›Tutorial: applied against target

After harvest

  1. Clean the yield

    Calibrate combines that ran side by side and drop turnarounds, stops and spikes, so a strip’s yield is the crop and not the machine.

    ›Tutorial: yield cleaning
  2. Read the result

    Compare treatments on the rate that went on and on the same productivity zone, then see what each rate returned in the Yield Report.

    ›Tutorial: trial analysis

›How the Yield Report checks each rate

Who runs trials on GeoPard

A rate change proved on one field before it goes on every field

Growers

Test a lower seeding or nitrogen rate on your own ground with your own planter, and change the whole farm only when the strips say so.

Agronomists and dealers

Run one protocol on many clients’ fields, compare hybrids and rates in split-plots, and hand each client a result read on the same ground.

Researchers

Every plot keeps its position on the field, next to yield, soil, elevation and as-applied layers, ready for the statistics you already use.

“GeoPard’s analytics have made it easy for our team and farmers to use precision ag tools effectively. Reliable analytics and consistent support throughout the season have improved input planning and management.”

Edoardo PozzatoEdoardo PozzatoPrecision Agriculture AgronomistSergio Bassan, ItalyThe dealer’s trial workflow

“It is a pleasure for us to work with the enthusiastic GeoPard team. Deeper insights into our strip-intercropping data enabled by the GeoPard tool are very valuable to us.”

PD Dr. Markus GandorferHead of Digitalization and Project LeadBavarian State Research Center for Agriculture (LfL)Read the story
Trial results by zone from a dealer-run silage corn trial: yield and profit for each trial area
A dealer-run silage corn trial in Italy: yield and profit for each trial area

Pricing

Trials are included

A trial is drawn on the zones map and exports with the prescription, at no extra charge. Annual covers every field; on Pay-As-You-Go you pay only for the zones or prescription map the trial sits on.

Annual

The whole farm, every trial and every field, all season.

$0.59 per acreper year on the first band, down to $0.45 as your area grows

  • ✓Unlimited zones, prescriptions and equation maps
  • ✓Minimum $200 a year, covering up to 339 acres
  • ✓One user seat included, extra seats $60 a year

Pay-As-You-Go

A trial on a few fields, or a first season.

$20 a monthplus each operation you run

  • ✓Field registration: $0.10 per acre, once
  • ✓Zones or VRA map, with the trial: $0.072 per acre
  • ✓Yield cleaning: $0.024 per acre
  • ✓Equation map: $0.10 per acre

30-day trial

Your own fields, before you pick a plan.

250 acres (101 ha)for 30 days, no card required

  • ✓Every analysis feature, trial layouts included
  • ✓John Deere Operations Center connection
  • ✓Nothing is charged when it ends, and your fields stay in your account

Start free

Billed in USD in acre regions such as the US and Canada, and in EUR everywhere else.

Full price list and payback estimator

On-farm trials software for growers, agronomists and dealers

An on-farm trial answers a question no seed guide or rate table can: what this rate does on this ground, with this planter and this season. The answer only holds if the comparison is fair. Strips that sit on different soil, a spreader that drifted off its target, or a combine that was never calibrated against its neighbour can each move a strip's yield more than the treatment did.

GeoPard keeps every trial on the field record. Strips and plots are drawn on the same zones map that carries the prescription, at the width of the implement and along the AB line, with a buffer between treatments and each block shuffled into a random order. The trial exports merged with the zones as one file for the display, so the machine applies each strip's rate without anyone touching a control in the cab.

Strip trials, plot grids and split-plots

Field strips run the whole length of the field and suit seeding and nitrogen rate comparisons with farm machinery. Zone strips are clipped to each management zone, for the question of whether the rate should change by zone. Plot grids hold every treatment once per block and suit hybrids and products on fairly even ground. Split-plots repeat a second factor, usually the hybrid, inside each rate, and a checkerboard spreads treatments across a highly variable field for a first look.

Trial and rate settings in GeoPard: checkerboard layout, four blocks, three seeding rates and the seed total per zone
Trial settings next to the prescription: layout, blocks, rates and the seed total per zone

Reading the result after harvest

After harvest the trial is read on cleaned yield and on the rate that actually went on, filtered to the ground where the applied rate held its target. Comparing treatments inside the same productivity zone removes the last bias: trials placed on the field's best ground out-yield the field average at every rate. The Yield Report then shows what each rate step returned against its cost, and the record stays with the field for next season's plan. Read the price list, or start with the Variable Rate ROI Calculator on your own crop.

Frequently asked questions

How many replications does a strip trial need?

Four to six for a rate comparison with farm machinery, and more on uneven ground. A single pair of strips cannot separate the rate from the soil under it, however large the yield gap looks.

The trial designer on this page shows the trade-off for your crop, rates and field: how often a trial of that size finds a real difference, and how often it points the wrong way.

Can I run the trial with my own planter or spreader?

Yes. Set the strip width to the implement's working width and the angle to your AB line, and add a buffer where rates could overlap. The trial exports merged with the zones as one prescription: ISO-XML for an ISOBUS terminal, shapefile for other displays, or a John Deere work plan sent to Operations Center.

The display applies each strip's rate as it applies any variable-rate map, so nobody changes a rate by hand in the field.

What if the machine did not apply the rate I planned?

Read the trial on the rate that went on. Import the as-applied map, keep only the ground where the applied rate sits within a few percent of the target, and compare the treatments there.

In the wheat trial on this page, the applied rate ranged from 120 to 189 kg/ha against three planned rates, which is why the comparison filters on it.

Can I test hybrids and rates in the same trial?

Yes, with a split-plot. Put the factor that is harder to change in the field, usually the rate, in the main plots and repeat the hybrids inside each of them. The result shows each rate, each hybrid, and whether a hybrid wants a different rate.

What do I need after harvest?

A yield map from the combine, the as-applied map, and the trial layout, which stays on the field in GeoPard. Clean and calibrate the yield first: turnarounds, stops and two combines that read differently move a strip's average more than most treatments do.

John Deere farms bring yield and as-applied data in through Operations Center; files from other makes upload from the display card.

Who sees my trial results?

You, and the people you share the farm with, such as your agronomist or dealer. GeoPard sells no seed, fertilizer or chemistry, and your trial layouts, yield and results can be downloaded at any time.

Put this season's trial on the map before the planter rolls

Lay the strips on your own field and send them with the prescription, or book a call to set up a trial protocol across your clients' fields.

wpChatIcon
wpChatIcon

    Request Free GeoPard Demo / Consultation








    By clicking the button you agree our Privacy Policy. We need it to reply to your request.

      Subscribe


      By clicking the button you agree our Privacy Policy

        Send us information


        By clicking the button you agree our Privacy Policy