NewOctober 2026 release: John Deere sync redesign, rate min and max limits, yield report zones

Variable Rate Lime

Variable rate lime

Variable rate lime maps from your soil pH

Turn pH and buffer pH results into a lime rate for every zone or grid cell, see the tons and the cost against your flat rate, and send the map to the spreader.

✓Lime where pH is below target

✓Tons and cost against a flat rate

✓Rates on the spreader display

Independent of lime and input sellers, and your farm data stays yours

30-day trial on up to 250 acres (101 ha), no card required

Variable rate lime prescription in GeoPard: five lime rates from 3,000 to 5,000 lb/ac on a field map, with the area, total product and cost for each rate

Lime map

One field, 50 m buffer pH cells, one flat rate to beat

A sampled field with an acid knoll, an acid corner and a calcareous draw. Set your target pH, tillage depth and lime, and compare the map with what a single field-average sample would spread.

Target soil pH
Depth to neutralize
$ per ton
Skip rates under

lb CaCO3/ac = [49,886 − 7,245 × buffer pH] × [6 in × 0.167], then divided by your ECCE.

Calibration equations from Iowa State University Extension, PM 1688, Table 16. The same equation, a University of Nebraska–Lincoln method and two Ukrainian lime tables sit in the GeoPard equation catalog, ready to edit.

Lime by the map00
Flat rate, one field sample00
Flat rate, short on acid ground00 of the field
Flat rate, spread near target00 of the field
0 · 50 m cellsSample field

Area by lime rate

    The most acid cells get 0 and 0 of the field gets none. Field total: 0 by the map, 0 at the flat rate.

    In GeoPard

    From the sampling plan to the spreader, on your own fields

    1. Plan the sampling

      Grid cells or management zones, core or composite samples, points placed and routed, and labels printed for the lab. Your crew walks it with the mobile app.

      ›Tutorial: soil sampling plans
    2. Bring in pH and buffer pH

      Upload the lab’s CSV or Excel file as it comes. Columns, units and languages are recognised, and each result lands on its field by plan ID or coordinates.

      ›Tutorial: lab results import
    3. Or load a pH scan

      Most soil scanner and on-the-go pH files come in as shapefiles with coordinates, at thousands of points per field.

      ›Tutorial: soil data import
    4. Run your lime equation

      Pick a lime method from the equation catalog or write the one your lab or agronomist uses, with your target pH, depth and ECCE. Every cell gets its rate.

      ›Tutorial: equation catalog
    5. Check the tons and the cost

      Group the rates into zones, set the product and price, and read the total tons, the average rate and the cost before you order.

      ›Tutorial: rates and totals per zone
    6. Send it to the spreader

      Download ISO-XML for an ISOBUS terminal or shapefile for other displays, or send the map to John Deere Operations Center as a file or a work plan.

      ›Tutorial: ISO-XML export

    Screens

    The rate in every cell, and the map where the operator works

    Equation map in GeoPard: a potash rate for every 50 m cell, calculated from the soil test value with the equation shown beside the map
    Equation map. A rate for every 50 m cell from the soil test value, with the equation beside the map. A lime equation runs the same way.
    Soil pH sample points from GeoPard shown as a map layer in John Deere Operations Center
    In Operations Center. Soil pH sent from GeoPard to John Deere Operations Center as a map layer.

    Soil teams on GeoPard

    From the agronomists who run the sampling and the rates

    “Thanks to the wide range of options in GeoPard, which fully meets our needs, soil agrochemical work within our company has become much more efficient and the results are more accurate. Technology is moving fast, and it is important to keep up.”

    Oleksandr PerederiyAgrochemistVitAgro, UkraineRead the story

    “GeoPard has transformed how fields are managed by turning complex data into practical, actionable recommendations. The platform helps build targeted soil sampling strategies that pinpoint specific field zones requiring attention, enabling zone-specific management instead of uniform application across entire fields.”

    Oleh BilanChief TechnologistVitAgro, Ukraine, 85,000 haRead the story

    “We are happy to have GeoPard as part of the platforms working with SoilOptix® data to enable growers and agronomists with the tools to accurately and visually analyze and manage their fields.”

    Zachary HarmerNorth America Sales and Global Support ManagerSoilOptix, CanadaRead the story

    Pricing

    What a lime map costs

    Annual covers every field, every lime, nitrogen and seed map, all year. Pay-As-You-Go charges once for each map you build.

    Annual

    The whole farm, every operation, all season.

    $0.59 per acreper year on the first band, down to $0.45 as your area grows

    A year on Annual, by farm size
    500 acres$295
    1,500 acres$833
    3,000 acres$1,598
    5,000 acres$2,578
    • ✓Unlimited sampling plans, equation maps and prescriptions
    • ✓Minimum $200 a year, covering up to 339 acres
    • ✓One user seat included, extra seats $60 a year

    Pay-As-You-Go

    A few fields, or a first lime season.

    $20 a monthplus each map you build

    • ✓Field registration: $0.10 per acre, once
    • ✓Sampling plan: $0.05 per acre
    • ✓Equation map: $0.10 per acre
    • ✓Zones or VRA map: $0.072 per acre
    • ✓Extra logins: $5 a month each

    30-day trial

    Your own fields, before you pick a plan.

    250 acres (101 ha)for 30 days, no card required

    • ✓Sampling plans, equation maps and lime prescriptions
    • ✓John Deere Operations Center connection
    • ✓Nothing is charged when it ends, and your fields stay in your account

    Start free

    Billed in USD in acre regions such as the US and Canada, and in EUR everywhere else. Every plan includes the John Deere Operations Center integration and the AI Assistant, with fair-use limits.

    Full price list and payback estimator

    Variable rate lime application

    Soil acidity is rarely even across a field. Eroded knolls, sandy streaks and old field boundaries run acid, while a draw over calcareous subsoil may need no lime at all. A single rate set from one composite sample spreads the field average everywhere: too little on the acid ground, where the crop keeps losing yield, and lime that does nothing on the ground already at target.

    Variable rate lime application sets the rate by the pH of each part of the field. GeoPard builds the map from the samples or the scan you already have and sends it to the spreader you already use.

    A lime prescription map from soil pH and buffer pH

    Start with the data. Plan grid or zone sampling in GeoPard, with the points routed and the lab labels printed, or load an on-the-go pH scan. Lab results import from the CSV or Excel file the lab sends, and each value lands on its field by plan ID or by coordinates.

    Then run the lime requirement for every cell. Soil pH shows where the ground is acid; buffer pH shows how much lime it takes to move it. The equation catalog includes the Iowa State University equations, which take buffer pH, target pH and the depth to neutralize, as well as a University of Nebraska-Lincoln method and two Ukrainian lime tables. Each one can be edited, or replaced with the method your lab or agronomist uses. Divide by the ECCE of your lime, set a minimum rate the spreader can hold, and the map is ready.

    Check the tons before you order

    Group the rates into zones, enter the product and its price, and read the total tons, the average rate and the cost for the field. Set it against your usual flat rate: the difference is often less about the total and more about where the lime goes. Download the prescription as ISO-XML or shapefile, or send it to John Deere Operations Center as a file or a work plan.

    Lime moves slowly and lasts several seasons, so the map is worth repeating with each sampling round. Keep the sampling points from year to year and the pH trend shows whether the acid patches are closing. Read how sampling plans work on the soil sampling page, and check what your region requires on soil sampling rules by country.

    Frequently asked questions

    Do I need buffer pH, or is soil pH enough?

    Soil pH tells you which ground is acid. Buffer pH tells you how much lime it takes to move it, because two soils at the same pH can hold very different reserve acidity. Most buffer pH lime methods, including the Iowa State equations on this page, need the buffer value from the lab.

    Where you only have soil pH, a method based on pH and soil texture does the job, such as the Ukrainian lime tables in the GeoPard equation catalog. Ask the lab for buffer pH on samples below your target.

    Can I use my own lime recommendation instead of the Iowa State one?

    Yes. The equation catalog carries the Iowa State University equations, a University of Nebraska-Lincoln method and two Ukrainian lime tables, and each one can be edited or replaced with the formula your lab, agronomist or programme uses.

    Set the target pH, the depth, the product's ECCE or neutralising value and any minimum or maximum rate, and the map follows your method field by field.

    Which spreaders and displays take the lime map?

    Download the prescription as ISO-XML for an ISOBUS terminal or as a shapefile for most other displays. On a John Deere farm, send it to Operations Center as a file or a work plan, and it is ready on the display.

    A lime contractor can take the same shapefile, so the rates reach the spreader that does the work.

    How dense should the pH sampling be?

    Dense enough to see the acid patches. Grid sampling suits a first baseline and fields with no history; zone sampling puts the cores where imagery, yield and elevation already show the field changing. A pH scanner gives thousands of points per field.

    GeoPard plans either kind, routes the crew and prints the lab labels. Where a regulation or programme sets the density, follow it: the soil sampling rules page lists them by country.

    How do the lime price and quality change the map?

    The quality changes the rates: the equation gives pure calcium carbonate, and dividing by the product's ECCE gives the tons of your lime. A 60 % ECCE product needs two thirds more than a 100 % one for the same correction.

    The price changes only the cost. Compare the map's total with your flat rate before you order, and set a minimum rate so the spreader is never asked for a rate it cannot hold.

    What does a lime map cost in GeoPard?

    On Annual, sampling plans, equation maps and prescriptions are included for every field on the farm, from $0.59 an acre for the first 750 acres down to $0.45. The minimum is $200 a year for up to 339 acres.

    On Pay-As-You-Go you pay $20 a month plus each map you build: $0.05 an acre for a sampling plan, $0.10 for an equation map and $0.072 for a zones or VRA map. The 30-day trial covers up to 250 acres (101 ha) with no card required.

    Lime the acid ground this season, and leave the rest

    Load your pH results and build the lime map on your own fields, or book a call to set up sampling, your lime method and the spreader.

    wpChatIcon
    wpChatIcon

      Request Free GeoPard Demo / Consultation








      By clicking the button you agree our Privacy Policy. We need it to reply to your request.

        Subscribe


        By clicking the button you agree our Privacy Policy

          Send us information


          By clicking the button you agree our Privacy Policy