NewOctober 2026 release: John Deere sync redesign, rate min and max limits, yield report zones

Synthetic Yield Map

Synthetic yield map

Synthetic yield map for every season, with or without a yield monitor

Enter the field’s average or total crop yield for a past season and GeoPard draws the map for it from that season’s satellite imagery and the field’s history. A harvest file that covers only part of the field is completed the same way.

✓A crop yield map from the figure on your scale tickets

✓Partial harvest files completed to the whole field

✓Every season counted in your multi-year zones

Independent of input sellers, and your farm data stays yours

30-day trial on up to 250 acres (101 ha), no card required

Calibrated yield from the combine next to a synthetic yield map built from satellite imagery and the field average, on the same field
Combine or satellite. The calibrated harvest next to the synthetic map of the same season: averages of 9.74 and 9.71 t/ha.

Synthetic yield map lab

Build a synthetic crop yield map, then check it against the harvest

A sample field harvested with a yield monitor in each of five seasons. Pick a season, enter its field average, keep the satellite scenes you trust, and compare the map with what the combine logged.

Crop
Harvest year
Dry summer: the knoll and the sandy streak suffer
Dry crop yield, from the scale tickets
bu/ac
Units

Satellite scenes from the season

Cloudy scenes start switched off

Field average on the map0scale tickets: 0 bu/ac
Accuracy against the harvest0 %100 % minus the average difference, cell by cell
Field mapped100 %scenes kept: 0
Middle 80 % of the field0bu/ac
Sample field, 62 ac (25 ha), 5 m cells
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

The sample field and its seasons are modelled: a knoll, a sandy streak, a draw and a wet corner that each season treats differently. In GeoPard the map for your field comes from its own satellite imagery, long-term productivity, soil, water, topography, weather and crop development.

Multi-year zones

Seasons without a yield monitor still count in your zones

Zones built on the seasons you happen to have logged follow the weather of those years. Tick the seasons the same field was harvested with a yield monitor, then fill the others with synthetic maps.

Harvested with a yield monitor

Seasons without a yield monitor
  • High zone
  • Medium zone
  • Low zone

0 % of the field falls in the same zone as with five full harvests, from 0 seasons in the zones.

In GeoPard

Two ways to make a synthetic yield map

From the field average or total

For a season with no yield monitor at all, or one whose file was lost. You enter the crop, the harvest month and year, and the dry crop yield from the scale tickets or the elevator, as an average or a total.

  • ✓The map’s field average matches the figure you enter
  • ✓The unit follows the crop and your area setting
  • ✓Any past season the satellite archive covers

From a partial or noisy harvest file

For a field harvested partly by a combine without a yield monitor, or a file that is only partly usable. GeoPard reads the pattern from the part that was logged and completes the rest of the field.

  • ✓One harvest file for the whole field
  • ✓An uncalibrated or noisy file brought to the right level
  • ✓Clean and calibrate the logged part first for the best map
Peas harvest in GeoPard: the restored synthetic yield map of the whole field next to the cleaned harvest file that covered 31.65 % of it
Peas, completed from a partial harvest. The harvesters logged 31.65 % of the field. The restored map covers 99.96 % of it at 2.52 t/ha, against 2.51 t/ha on the logged part.

How to make one

  1. Add the field

    Upload or draw the boundary, or bring it in with its history from John Deere Operations Center.

    ›Upload a field boundary
  2. Open Yield Data and choose Generate Synthetic Yield Map

    The option sits in the Yield Data section of the field, next to your harvest files.

    ›Generate Synthetic Yield Map
  3. Enter the crop, the harvest month and year, and the dry crop yield

    As an average or a total, in the unit you work in.

  4. To complete a partial file, pick it with Select Map

    Clean and calibrate the file first, so the completed map starts from real readings.

    ›Cleaning and calibration
  5. Generate

    The synthetic map joins your harvest files in Yield Data, ready for zones, comparisons, reports and export.

    ›Synthetic yield map in the docs
The Generate Yield Map dialog in GeoPard: crop type, harvest month, year, dry crop yield as an average or a total, value and unit, and a link to reconstruct an existing harvest map
Generate Yield Map. Crop, harvest month and year, and one figure. Select Map completes an existing harvest file instead.

What it is for

A synthetic yield map works wherever a harvest file does

Each item opens its tutorial right here on the page.

Zones

Plans built on more seasons

  • Multi-year productivity zones

    Monitor seasons and synthetic seasons together, alone or with soil, imagery and elevation, for the zones your seeding and fertilizer plans run on.

    ›Multi-year zones
  • Zones from one season

    A zones map from a single synthetic season, the same way as from a harvest file.

    ›Zones from harvest data
Compare

Season against season

  • Two seasons, cell by cell

    A similarity map shows which ground holds its place year after year and which moves with the weather.

    ›Comparing harvests
  • Synthetic against calibrated

    Where a season has both, set them side by side and see how close they come on your own field.

    ›Compare layers
Decide

Reports, formulas and the machine

  • Yield Report

    Crop yield against the application rates that went on, zone by zone.

    ›Yield Report
  • Profit, removal and nitrogen use

    Crop yield in a formula: profit per zone, nutrient removal for the next fertilizer plan, nitrogen use by zone.

    ›Equation-based analytics
  • Back to John Deere

    Send the map, or the zones built on it, to Operations Center as a layer or a prescription.

    ›Export map layers
Inputs

What GeoPard needs from you

  • The field boundary

    Uploaded, drawn, or synced from John Deere Operations Center.

  • Crop, harvest month and year

    Including fields with two harvests in one year.

  • One figure

    The dry crop yield of the field, as an average or a total. Or a partial harvest file instead.

Behind the map

Where the pattern comes from

  • The season’s satellite imagery

    How the crop developed that year, scene by scene, with cloudy scenes kept out.

    ›Crop development graph
  • The field’s history

    Long-term productivity, soil, water, topography and weather, so the map follows what limits the crop on that ground.

    ›Satellite monitoring
Coverage

Crops and regions

  • Corn
  • Corn silage
  • Soybeans
  • Wheat
  • Barley
  • Rye
  • Oats
  • Rapeseed
  • Canola
  • Sunflower
  • Cotton
  • Rice
  • Sorghum
  • Every region GeoPard covers

    Including regions with several harvests a year.

Precision ag documentation, module by module

Imports, management zones, variable rate, yield cleaning, soil sampling, trials, exports and the API. Each one step by step, with the agronomy behind the map.

On GeoPard

From the people who plan with harvest data

“When I compare the +20 year GeoPard product map to fields we have a multiple year average yield data its a very close match. The +20 year average map is an excellent product for growers lacking good yield data.”

Jason DillerPrecision Agriculture ManagerMercer Landmark, USA

“With the help of GeoPard Agriculture’s Profit Map, we were able to gain a deeper understanding of the profitability of our partners’ fields. This allowed our farmers to make more strategic decisions on the allocation of resources, which ultimately increased operational efficiency and improved bottom line indicators.”

Evgeniy ChesnokovDirector of Agricultural ManagementEurasia Group Kazakhstan, John Deere dealerRead the story

“The first year, it turned out that we already had a yield increase of 5%. I use Geopard a lot to adjust the fertilisation to the fields.”

Nicole BarteldsArable farmer and digital agriculture consultantDe Databoerin, Drenthe, the NetherlandsRead the story

Pricing

What a synthetic yield map costs

Annual covers every field, every season and every map, all year. Pay-As-You-Go charges once for each map you build and each file you import.

Annual

The whole farm, every operation, all season.

$0.59 per acreper year on the first band, down to $0.45 as your area grows

A year on Annual, by farm size
500 acres$295
1,500 acres$833
3,000 acres$1,598
5,000 acres$2,578
  • ✓Unlimited harvest imports, cleaning, synthetic crop yield maps and zones
  • ✓Minimum $200 a year, covering up to 339 acres
  • ✓One user seat included, extra seats $60 a year

Pay-As-You-Go

A few fields, or a few missing seasons to fill.

$20 a monthplus each file and map

  • ✓Synthetic crop yield map: $0.024 per acre
  • ✓Field registration: $0.10 per acre, once
  • ✓Harvest file import: $0.024 per acre
  • ✓Cleaning and calibration: $0.024 per acre
  • ✓Zones or VRA map: $0.072 per acre

30-day trial

Your own fields, before you pick a plan.

250 acres (101 ha)for 30 days, no card required

  • ✓Synthetic crop yield maps, harvest import, cleaning and zones
  • ✓John Deere Operations Center connection
  • ✓Nothing is charged when it ends, and your fields stay in your account

Start free

Billed in USD in acre regions such as the US and Canada, and in EUR everywhere else. Every plan includes the John Deere Operations Center integration and the AI Assistant, with fair-use limits.

Full price list and payback estimator

What a synthetic yield map is, and when to use one

A synthetic yield map is a crop yield map for a season the yield monitor did not record. Many fields have a gap in their harvest history: an older combine without a yield monitor, a custom harvester who never sent the file, a card that failed, or a file so noisy it was never used. The scale tickets or the elevator still say what the field produced. GeoPard takes that one figure, the field's average or total dry crop yield, and spreads it across the field the way the crop actually grew that season.

The pattern comes from the season's satellite imagery, weighted towards the stages when the crop shows its differences most clearly, and from what GeoPard knows about the field: its long-term productivity, soil, water, topography and weather. Cloudy scenes are kept out. The figure you enter sets the level, so the map's field average matches your scale tickets.

How close it comes to a harvest file

Set against calibrated harvest files of corn silage, corn, soybeans and wheat, synthetic maps reached an accuracy above 90 %. The best maps come from a season with clear imagery around grain fill and a figure taken from the scale tickets rather than from memory. Where the same season has both a harvest file and a synthetic map, compare them on your own field before you rely on the synthetic seasons.

Completing a partial harvest

When only part of a field was logged, the synthetic map learns the pattern from the logged part and completes the rest, so the season becomes one harvest file for the whole field. Clean and calibrate the logged part first. A noisy or uncalibrated file is brought to the right level on the way.

What to do with it

Synthetic seasons sit next to your harvest files and work the same way. They fill the gaps in multi-year productivity zones, so the zones behind your variable rate seeding and nitrogen rates by zone no longer follow the weather of the two years you happened to log. They go into a similarity map against another season, into the Yield Report, and into the equation maps an agronomist writes for profit or nutrient removal. For the logged seasons, the crop yield data tools clean and calibrate the harvest files first.

Frequently asked questions

How accurate is a synthetic yield map?

Set against calibrated harvest files of corn silage, corn, soybeans and wheat, synthetic maps reached an accuracy above 90 %. The map is closest when the season had clear satellite scenes around grain fill and the figure you enter comes from the scale tickets.

Where one season has both a harvest file and a synthetic map, put them side by side on your own field before you lean on the synthetic seasons.

What do I need to enter?

The field boundary, the crop, the harvest month and year, and the dry crop yield of the field as an average or a total. The unit follows the crop and your area setting, and you can change it.

Use the weighed figure from the scale tickets or the elevator where you have it. The map's field average will match it exactly.

My yield monitor logged only part of the field. Can GeoPard complete it?

Yes. In the same dialog choose Select Map and pick the harvest file. GeoPard reads the pattern from the logged part and completes the rest of the field, so the season becomes one map for the whole field.

Clean and calibrate the logged part first. Zeros, spikes and stripes from several combines would otherwise shape the completed map.

Can I mix synthetic seasons and harvest files in multi-year zones?

Yes. A synthetic map sits in Yield Data next to your harvest files and goes into multi-year zones, comparisons, the Yield Report and equation maps the same way.

Filling the missing seasons keeps the zones from following the weather of the few years you happened to log.

Which crops and regions does it cover?

Corn, corn silage, soybeans, wheat, barley, rye, oats, rapeseed, canola, sunflower, cotton, rice and sorghum, in every region GeoPard covers, including regions with several harvests a year.

For a crop outside the list, book a call and we will look at your fields.

Who owns the synthetic maps?

You do, like every map in your account. GeoPard does not sell inputs, so nothing on the map is shaped to sell you a product, and you can export it or send it to John Deere Operations Center whenever you want.

Fill the seasons your yield monitor missed

Add a field, enter the average from the scale tickets for each missing season, and build your zones on all of them. Or book a call to set up a whole farm's history.

wpChatIcon
wpChatIcon

    Request Free GeoPard Demo / Consultation








    By clicking the button you agree our Privacy Policy. We need it to reply to your request.

      Subscribe


      By clicking the button you agree our Privacy Policy

        Send us information


        By clicking the button you agree our Privacy Policy