NewOctober 2026 release: John Deere sync redesign, rate min and max limits, yield report zones

Variable Rate Seeding

Variable-rate seeding

Variable-rate seeding maps your planter can run

Build seeding zones from decades of satellite imagery, your yield maps and soil data, set the population for each zone, and send the prescription to John Deere, an ISOBUS terminal or any display that reads a shapefile.

✓Zones without years of yield maps

✓The field average stays at your target

✓Planted against prescribed, after the pass

Independent of seed companies, and your farm data stays yours

30-day trial on up to 250 acres (101 ha), no card required

Variable-rate soybean seeding prescription in GeoPard: three seeding rates from 126,000 to 154,000 seeds per acre, set from the field's yield history, with the map statistics
Soybean seeding prescription: 126,000, 140,000 and 154,000 seeds per acre, set from the field’s yield history

Seeding prescription

Set a population for every zone of a sample field

The zones come from the field’s long-term productivity, and the field average stays at your target stand.

Crop
plants per acre
%
More seed on

Corn: the best plant density rises with the yield level of the ground. Assefa et al., Crop Science, 2016

0%4%10%
Seed for the field
per bag of 80,000 seeds

Overwrite it with your seed quote. Seeding Rate Calculator for the stand from the seed tag.

Sample field 160 acres, five zones

30,600 32,000 33,400 34,800 36,200 seeds per acre
0 seedsmoved from the weaker to the stronger ground
37,700field average, seeds per acre
$0seed bill for the field, the same as uniform seeding
Prescription
ZoneAcresSeeding ratevs uniform seeding
High1936,200+8%
Above average3734,800+4%
Average5633,4000%
Below average3232,000−4%
Low1630,600−8%
ISO-XMLShapefileJohn Deere work plan

Agronomy

Which way the population moves

The direction depends on the crop. Set it per crop and per field, and check it against your own seed company’s guidance for the hybrid or variety.

Corn and sunflower

More seed where the ground yields more

Strong ground has the water and nutrients to fill extra ears or heads, so the profit-maximising population rises with the yield level. On light, droughty knolls the same plants compete for too little water, and a lower population holds its crop yield with less seed.

Assefa et al., Crop Science, 2016. NDSU Extension, Sunflower Production.

Soybean, cereals and oilseed rape

More seed where establishment or canopy falls short

On strong ground, soybean branches and wheat tillers compensate for a thinner stand. On weaker ground, or where the seedbed is poor, fewer seeds become plants and the canopy closes late, so the seeding rate goes up there.

Corassa et al., Agronomy Journal, 2018. AHDB, Wheat growth guide. Canola Council of Canada.

In GeoPard

From zones to the planter, and back after harvest

1

Zones from the field’s own history

Satellite imagery back to the 1980s shows the ground that carries more crop year after year, even on fields with no yield maps. GeoPard picks representative seasons and balances the dry years against the wet ones, so one odd season does not set next year’s population.

›Tutorial: multi-year zones
The same field in near-infrared satellite images from 1998 to 2019: the weak and strong ground shows up season after season
One field, fourteen seasons: the weak spots return in almost every image
2

Sharpen them with yield maps, soil data and slope

Add cleaned yield maps, EC or soil scanner data and elevation, and weight each layer. Steep slopes and light, bright soils count against the zone’s potential, and fields with gaps in their yield history get a synthetic yield map from the imagery.

›Tutorial: multi-layer zones
Field potential zones in GeoPard built from satellite imagery, soil EC, slope and yield data, with the area and average of each zone
Five field potential zones from imagery, soil EC, slope and yield maps, with the area of each
3

Set the seeding rates and send them to the planter

Give each zone a population, or set an average with a step between zones and a minimum and maximum, and GeoPard keeps the total seed where you put it. Download ISO-XML for an ISOBUS terminal or a shapefile, or send the prescription to John Deere Operations Center as a file or a work plan, together with the nitrogen map for the same pass.

›Tutorial: seeding rates per zone
Close-up of a variable-rate soybean seeding map: three seeding rates laid out across the field by its yield history
126,000, 140,000 and 154,000 seeds per acre: 10% above and 10% below the field’s average seeding rate, set by its yield history
4

Check what the planter put in the ground

The planter logs a target and an applied seeding rate everywhere it goes. Lay the two side by side, and see where the population held, where a row unit or a turn dropped it, and how close the field came to the plan.

›Tutorial: planted against prescribed
Planter target seeding rate against applied seeding rate for variable-rate corn seeding, side by side with the statistics of each
Corn seeding: the target seeding rate on the left, the seeding rate the planter applied on the right

Seed and nitrogen in one pass

Build the nitrogen map on the same zones and send both to John Deere in one work plan.

›Tutorial: seeding and nitrogen

Your own formula

Write the seeding rate as a formula over any layer, such as yield history or plant available water, and run it across many fields at once.

›Tutorial: equation-based analytics

What each seeding rate returned

After harvest the Yield Report sets each zone’s population against its yield and says whether the extra seed paid.

›How the Yield Report works

From the field

Zones where there are no yield maps

“Geopard is a great tool for us to build management zones with. When we don’t have access to multiple years worth of yield data for a grower, we can utilize GeoPard and the 20+ years of satellite imagery it gives us to build our management zones.”

Isaac HickersonIsaac HickersonData ManagerHutson Inc., John Deere dealer, USA

Pricing

What a seeding prescription costs

Annual covers every field and every prescription on the farm. Pay-As-You-Go charges each zones map or seeding prescription map once, by area.

Annual

The whole farm, every map, all season.

$0.59 per acreper year on the first band, down to $0.45 as your area grows

  • ✓Unlimited zones, seeding, fertilizer and lime prescriptions
  • ✓Minimum $200 a year, covering up to 339 acres
  • ✓One user seat included, extra seats $60 a year

Pay-As-You-Go

A few fields, or a first season of variable-rate seeding.

$20 a monthplus each map you run

  • ✓Field registration: $0.10 per acre, once
  • ✓Zones map or seeding prescription map: $0.072 per acre
  • ✓Month to month, with no annual commitment

30-day trial

Your own fields, before you pick a plan.

250 acres (101 ha)for 30 days, no card required

  • ✓Zones, seeding prescriptions and exports
  • ✓John Deere Operations Center connection
  • ✓Nothing is charged when it ends

Start free

Billed in USD in acre regions such as the US and Canada, and in EUR everywhere else.

Full price list and payback estimator · Management zones and VRA maps

Variable-rate seeding software

A field rarely yields the same from end to end. Knolls dry out first, draws hold water, and a change of soil can halve the crop yield over a few rows. A single population across all of it puts too many plants on the ground that cannot feed them and too few where the soil could carry more. Variable-rate seeding sets the population to the ground: a seeding rate for each zone, written into a prescription the planter follows pass by pass.

Seeding zones from the field's own record

The zones are where the work is. GeoPard builds them from decades of satellite imagery, which shows the same weak and strong patches returning season after season, so a field with no yield maps still gets a sound seeding map. Cleaned yield maps, soil EC or scanner data and elevation sharpen the zones where you have them, and each layer carries the weight you give it: steep slopes and light, bright soils count against the potential of a zone.

A variable-rate planting map in a few minutes

On top of the zones, set the population per zone, or set the field average and a step between zones and let GeoPard space the seeding rates while the total seed stays where you put it. For corn, the population usually rises with the yield level of the ground; for soybean and small grains it is often the other way round. The prescription goes to the planter as ISO-XML, as a shapefile, or straight to John Deere Operations Center as a file or a work plan, and the nitrogen map for the same zones can travel in the same work plan.

Checked after planting and after harvest

The planter logs the seeding rate it was asked for and the seeding rate it put in the ground. Laid side by side, the two show where the population held and where it did not. After harvest, the crop yield in each zone comes back against its population, so next season's map starts from what this one returned. Work out the population from your seed tag with the Seeding Rate Calculator, build zones for every input on the management zones and VRA maps page, or read the Yield Report to see how each seeding rate paid.

Frequently asked questions

Can I build a variable-rate seeding map without yield maps?

Yes. Satellite imagery of your field goes back decades, and the ground that carries more crop shows up in season after season. GeoPard picks representative years from that record, balancing the dry seasons against the wet ones, and builds the field potential zones from them.

Where you have cleaned yield maps, soil EC or scanner data and elevation, add them to sharpen the zones. A field with gaps in its yield history gets a synthetic yield map from the imagery.

Should the population go up or down on the better ground?

For corn and sunflower, up: the best plant density rises with the yield level of the ground, and droughty knolls hold their crop yield with fewer plants. For soybean, cereals and oilseed rape it is often the other way round, because strong ground compensates for a thinner stand through branching or tillering, while poor seedbeds establish fewer plants.

Set the direction per crop and per field, and check it against your seed company's guidance for the hybrid or variety you plant.

How do I set the seeding rate for each zone?

Type a population for each zone, or set the field average with a step between zones and a minimum and maximum. GeoPard keeps the field total where you put it and shows the seed for each zone and for the field, ready for the seed order.

Seeding rates can also come from a formula over any layer, such as yield history or plant available water, and run across many fields at once.

Which planters and displays can run the prescription?

Download the prescription as ISO-XML for an ISOBUS terminal, as a shapefile for most other displays, or in John Deere, CNH and AGCO formats. On a John Deere farm, send it to Operations Center as a file or as a work plan, together with the nitrogen map for the same pass.

After planting, import the as-planted data and lay the applied seeding rate against the target seeding rate to see where the planter held the population.

What does a seeding prescription cost?

On Annual every zones map and prescription is included, from $0.59 an acre a year on the first band, down to $0.45 as the farm grows, with a $200 minimum. On Pay-As-You-Go each zones map or seeding prescription map costs $0.072 an acre, plus $20 a month.

The 30-day trial covers 250 acres with every feature, and no card is needed.

Have this spring's seeding maps on the planter display

Build the zones and the populations on your own fields, or book a call to set up John Deere, your displays and a price for your acres.

wpChatIcon
wpChatIcon

    Request Free GeoPard Demo / Consultation








    By clicking the button you agree our Privacy Policy. We need it to reply to your request.

      Subscribe


      By clicking the button you agree our Privacy Policy

        Send us information


        By clicking the button you agree our Privacy Policy