NewOctober 2026 release: John Deere sync redesign, rate min and max limits, yield report zones

Variable Rate Nitrogen

Variable rate nitrogen

Variable rate nitrogen, set zone by zone from your own field data

Give each management zone the nitrogen its crop yield potential and soil supply call for, send the prescription to the spreader, and measure after harvest how much of it the crop used.

✓Nitrogen per zone from harvest yield history, soil tests and crop imagery

✓Prescriptions for ISOBUS terminals and John Deere

✓Applied nitrogen rates and nitrogen use checked after harvest

Independent of input sellers, and your farm data stays yours

30-day trial on up to 250 acres (101 ha), no card required

Nitrogen side-dress zones in GeoPard from a crop chlorophyll index, with the average, area and range of each zone
Side-dress zones in potatoes from a satellite chlorophyll index, with the area and range of each zone

Nitrogen by zone

Build a nitrogen prescription for a sample field

Pick the crop, enter your crop yield goal, soil nitrate and prices, and set each zone from your harvest yield maps. Every nitrogen rate comes from the extension guide named under the table, with the working shown.

Crop and inputs

bu/ac
ppm
lb N/ac
$/bu Sets the guide’s price adjustment from the corn to nitrogen price ratio.
$/ton
ac
Nitrogen rate by zone
0 0 0 0 0 0
00lb N/ac
Variable nitrogen, field average0lb N/ac, 0 across zones
Same nitrogen everywhere, same guide0lb N/ac on every zone
Nitrogen moved between zones0lb N/ac; 0 of the field gets less
Nitrogen bill, whole field00 of product, 0 against the same nitrogen everywhere

Zone 3: N = (35 + 1.2 × 0 − 8 × 0 − 0.14 × 0 × 0 − 0) × 0 = 0 lb N/ac · crop yield in bu/ac, nitrate in ppm, organic matter in %, price ratio 0

Zones from your harvest yield maps

ZoneShare of fieldCrop yield, % of field averageOrganic matter, %Crop yield goalNitrogen rateFertilizer product
1 · Knolls14%000
2 · Slopes21%000
3 · Flats30%000
4 · Footslopes23%000
5 · Draw12%000

Nitrogen per zone against the same nitrogen everywhere

10 20 30 40 50 same everywhere

Sources. Corn: University of Nebraska–Lincoln EC117, the grain equation with its corn to nitrogen price adjustment, computed in its own units. Change the factor, the credits or the zone values to match the guide you farm by.

In GeoPard

From zones to the spreader, and back to the harvest

The same logic as the builder above, on your own fields: your harvest yield maps, soil tests and imagery in, a prescription for the terminal out, and the applied nitrogen rates checked against the harvest.

Before the season

  1. Map the zones

    Combine years of satellite imagery, cleaned combine yield maps, soil organic matter and elevation into management zones. Merge or split them to match what you know of the field.

    ›Tutorial: multi-year zones
  2. Set nitrogen per zone

    Pick a target average or a target total, the step between zones and the minimum and maximum your spreader holds. The nitrogen rate table totals the product for the order.

    ›Tutorial: nitrogen rates per zone
  3. Or write your guide’s formula

    Type the equation from your state or national guide once, with crop yield goal, soil nitrate and organic matter as inputs, and get the nitrogen rate for every zone or every pixel.

    ›Tutorial: equation-based maps

In the season

  1. Side-dress from the crop

    A chlorophyll index from cloud-free satellite passes shows where the canopy is short of nitrogen. Split the dose and add the side-dress where the crop asks for it.

    ›Tutorial: side-dress nitrogen in potatoes
  2. Seed and nitrogen in one plan

    Build the seeding map and the first nitrogen map from the same soil scan, and send both to John Deere Operations Center as one work plan.

    ›Tutorial: seed and nitrogen from a soil scan
  3. Send it to the spreader

    Download ISO-XML for an ISOBUS terminal or a shapefile for other displays, in kg/ha, lb/ac, l/ha or gal/ac, or send the prescription to Operations Center as a file or a work plan.

    ›Tutorial: ISO-XML export

After harvest

  1. Check what went on

    Set the application rate the spreader logged against the nitrogen rate you planned, pass by pass, and see where it held the prescription.

    ›Tutorial: applied against target nitrogen rates
  2. Nitrogen use by zone

    Every application summed, set against the nitrogen the harvest removed, gives use efficiency and surplus for each part of the field.

    ›Tutorial: nitrogen use efficiency
  3. Prove the nitrogen rate

    Put nitrogen rate strips in the same pass and read the response from the combine yield map, so next year’s nitrogen rates rest on your own ground.

    ›Tutorial: field trial analytics
Building management zones in GeoPard from seven seasons of satellite imagery, soil organic matter and a cleaned corn yield map
Zones from seven seasons of imagery, soil organic matter and a cleaned combine yield map of corn

After harvest

Know where the nitrogen went

  • ✓Total applied nitrogen from every pass the spreader logged, base and side-dress
  • ✓Uptake from the combine yield map, and from grain protein where the combine measures it
  • ✓Use efficiency and surplus per zone: cut where surplus is high and crop yield held, add where the crop ran short
  • ✓The harvest Yield Report shows whether each extra pound of nitrogen returned more than it cost
Nitrogen use efficiency map of a wheat field after harvest, in percent, from applied nitrogen and harvested protein
Nitrogen use efficiency in wheat, from four applications and harvested protein
Nitrogen target rate map next to the applied rate logged by the spreader, with statistics for each
The planned nitrogen rate next to the application rate the spreader logged

On the farm

The same nitrogen, placed where the crop needs it

Potatoes in the Netherlands

+5 to 10%

crop yield with the same total nitrogen, reported over several seasons by a Dutch potato fertilization consultancy.

About 60% of the nitrogen goes on early. At crop closure, a satellite chlorophyll map sets the side-dress zone by zone, and the prescription goes to the spreader as ISO-XML.

›Read the case

“The first year, it turned out that we already had a yield increase of 5%. I use Geopard a lot to adjust the fertilisation to the fields.”

Nicole BarteldsNicole BarteldsArable farmer and digital agriculture consultantDe Databoerin, Drenthe, the NetherlandsRead it in Future Farming

“The synergy between GeoPard and LVA is more than just a business partnership; it’s a commitment to revolutionizing applied agronomic practices through data-driven decisions. This collaboration is dedicated to empowering farmers with enhanced agronomic insights.”

Michael EckhardtHead of the Precision Ag DepartmentLVA, John Deere dealer, GermanyRead the nitrogen use story

Pricing

What a nitrogen prescription costs

Annual covers every field and every map. Pay-As-You-Go charges each zones map or equation map once, by area.

Annual

The whole farm, every prescription, all season.

$0.59 per acreper year on the first band (€1.35 per hectare), down to $0.45 (€1.03) as the farm grows

  • ✓Unlimited zones, nitrogen maps, equation maps and exports
  • ✓Minimum $200 (€185) a year

Pay-As-You-Go

A few fields, or a first season of variable rate nitrogen.

$20 a month(€19) plus each map you run

  • ✓Zones or VRA map: $0.072 per acre (€0.165 per hectare)
  • ✓Equation map: $0.10 per acre (€0.229 per hectare)
  • ✓Month to month, with no annual commitment

30-day trial

Your own fields, before you pick a plan.

250 acres (101 ha)for 30 days, no card required

  • ✓Zones, nitrogen maps and ISO-XML export
  • ✓John Deere Operations Center connection

Start free

Billed in USD in acre regions such as the US and Canada, and in EUR everywhere else. Full price list

Variable rate nitrogen application software

A flat nitrogen rate is set for the average of a field, and most fields are not average anywhere. Eroded knolls with little organic matter cannot turn extra nitrogen into crop yield, while deep footslopes and draws carry more crop and also release more nitrogen from the soil. Variable rate nitrogen gives each management zone the rate its own yield potential and soil supply call for, inside the minimum and maximum your spreader can hold.

Zones first, then nitrogen rates

GeoPard builds management zones from years of satellite imagery, cleaned combine yield maps, soil organic matter, EC scans and elevation. Each zone then gets a nitrogen rate, set by hand, spread across the zones against a target average or total, or calculated from the equation in your state or national guide with yield goal, soil nitrate and organic matter as inputs. The nitrogen rate table totals the product for the order before anything leaves the office.

From the office to the spreader

The prescription downloads as ISO-XML for ISOBUS terminals or as a shapefile for other displays, in kg/ha, lb/ac, l/ha or gal/ac. On a John Deere farm it goes straight to Operations Center as a file or as a work plan, together with the seeding map for the same pass. In season, a chlorophyll index from the latest cloud-free satellite pass shows where the canopy is short of nitrogen, so a split dose can be side-dressed by zone.

Checking the nitrogen after harvest

Every pass the spreader logs comes back as an as-applied map. Set against the prescription, it shows where the machine held the application rate. Set against the combine yield map, and against grain protein where the combine measures it, it gives nitrogen uptake, nitrogen use efficiency and surplus for each zone. That is the evidence for next year's nitrogen rates: cut where surplus was high and crop yield held, add where the crop ran short, and use rate strips in the same pass to test a change on your own ground.

For a whole-farm estimate of what variable rate application is worth, use the ROI calculator for variable rate application, and after harvest the harvest Yield Report shows whether each extra pound of nitrogen returned more than it cost.

Frequently asked questions

Which nitrogen recommendation do the nitrogen rates follow?

Yours. In GeoPard you set the nitrogen rate for each zone yourself, or type the equation from your state or national guide once and let it run on every zone, with crop yield goal, soil nitrate and organic matter as inputs.

For the sample field above: corn follows the University of Nebraska–Lincoln EC117 equation, winter wheat the Oklahoma State 2 lb per bushel rule, canola the Canola Council of Canada uptake figure and potatoes the Virginia Cooperative Extension factor. Change the factor and the credits to the guide you farm by.

Do I need combine yield maps to make nitrogen zones?

No. Years of satellite imagery show the ground that carries more crop season after season, and zones can start from that alone.

Cleaned combine yield maps, soil organic matter, EC scans and elevation sharpen the zones whenever you have them. In season, a chlorophyll index from the latest cloud-free pass shows where the canopy is short of nitrogen.

Does variable rate nitrogen use less nitrogen than one rate for the whole field?

It moves nitrogen first. Weak ground gets less, strong ground gets what its crop yield potential calls for, and the field total can go down, stay level or rise, depending on the field and the guide.

In a Dutch potato programme, the same total nitrogen placed by zone returned 5 to 10% more crop yield. After harvest, the nitrogen use map shows per zone whether the nitrogen rate was too high, too low or right.

Can I split the nitrogen and side-dress by zone?

Yes. Each application gets its own prescription: a base dose at planting, then a side-dress from the crop's chlorophyll at row closure or stem elongation.

Every pass the spreader logs comes back as an as-applied map, and GeoPard adds them up to the total applied nitrogen for the season.

Which spreaders, sprayers and displays can load the prescription?

ISO-XML for ISOBUS terminals, shapefile for most other displays, and John Deere Operations Center as a file or a work plan. Application rates go out in kg/ha, lb/ac, l/ha or gal/ac, with the minimum and maximum your machine holds.

The ISO-XML download carries three variants, so check which one your terminal reads before the first pass.

Who sees my field and nitrogen data?

You, and the people you share a farm with. GeoPard does not sell fertilizer or any other input, and your harvest, soil and application data stay yours.

Have your nitrogen prescriptions ready before the first pass

Connect your fields and build zones and nitrogen rates on your own data, or book a call to set up John Deere, your terminals and your guide's formula.

wpChatIcon
wpChatIcon

    Request Free GeoPard Demo / Consultation








    By clicking the button you agree our Privacy Policy. We need it to reply to your request.

      Subscribe


      By clicking the button you agree our Privacy Policy

        Send us information


        By clicking the button you agree our Privacy Policy